Pull Down Spray Kitchen Mixer Tap Chrome-28107.
Single-Handle Kitchen Faucet with Pull Down Spray Head and Hose. Modern pull out kitchen mixer tap in solid brass, manual polished with chrome plating.
Sanliv Kitchen Faucets: pull out spray kitchen faucet – wall mount kitchen mixers – sink faucets – brass faucet – water Faucet – mixer taps.
Kitchen Sink Spray Head
We talked about how to install Kitchen Sink Sprayer Hose and Hand Spray Head in previous article. But How to Repair or Replace a Faucet Spray Head and Hose? Removing and repairing a faucet spray head is simple if you carefully follow a few steps.
First, if a hose leaks or blocks water, detach it for possible replacement, starting at the spray head. Unscrew the head from its coupling, then free the coupling from the hose by prying off a retaining snap ring with the tip of a screwdriver or penknife.
Replace the hose washer if necessary, and try to clear a blocked hose by running water through it at full blast (with the spray head removed, opening a faucet will send water to the hose rather than the sink spout). If the hose still leaks or is permanently obstructed, then keep reading for the next step.
Only a single hex nut secures the hose to its attachment at the base of the spout, but this nut is often hard to get at. If you cannot unscrew it with an ordinary wrench or a pair of locking pliers, use a basin wrench, a plumber’s tool especially designed for working in close quarters. Lie on your back under the sink as you unscrew the nut, and illuminate the work area with a work light or a flashlight.
To work on the faucet diverter valve, you first must get into the spout itself. In some sinks the spout is secured by a grooved ring, in others by a nut atop the spout. These chrome-plated fasteners are easily scarred; remove them carefully with a tape-wrapped wrench or pliers.
Inside the faucet body you can now see the tip of the diverter valve, usually capped by a brass screw. The screw is an integral part of the valve: turn it just enough to free the valve from the valve seat inside the faucet body, then pull out the screw and valve together. A valve without a screw top can simply be pulled straight out with pliers.
How to Clean and Repair a Sink Faucet Spray Nozel? When it’s time to clean or repair a sink faucet spray nozzle, be very careful since there is an array of small parts involved. Unscrew the aerator from the end of the spout with tape-wrapped pliers. Disassemble the parts inside the aerator body and set them aside in the correct order and orientation: a part reassembled upside down will keep the aerator from working.
Whatever its design, your aerator will contain a plastic or rubber washer, a disk perforated by tiny holes or a sawtooth edge, and one or more screens. A more complex model may also have a disposable adapter for internal and external spout threads, and air-intake holes in the outer shell.
Clean the screens with a small stiff brush; use the brush and a toothpick to clean out disk and intake holes. Replace badly worn or misshapen washers, and flush out all parts by holding them upside down in a full stream of water before reassembling the aerator.
On some models you can unscrew the tip of a spray nozzle by hand. More often it is secured by a Phillips screw and the screw may be concealed by a cover. Pop the cover out with a screwdriver of penknife, remove the retaining screw and disassemble the internal parts.
Clean or replace these parts as you would those of an aerator; before reassembling them, run water through the spray head at full force for a minute or two. Do not try to repair the mechanism inside the spray head. If defective, this sealed unit should be replaced by an identical model from the manufacturer.
How to choose a pullout or pull-down spray kitchen faucet? Single handle kitchen faucet with pull down spout Buying Guide. Pullout spray Kitchen Faucets offer the functionality of a side spray with the streamlined look of one-piece faucet. Pull-down spray faucets let you adjust the water flow, choosing between an aerated stream and a spray. Some offer a second, more powerful spray setting for intense cleaning. Inspired by professional kitchens, these faucet types provide mobility and ease of cleaning, as well as versatility.
If you expect to use the spray frequently, or if you alternate quickly between regular water flow and spraying, consider a pullout spray spout. Pullout sprays can be controlled with one hand, leaving the other free to hold pots or vegetables, for example. In addition, many pullout sprays are ergonomically designed to fit comfortably into your hand.
Before you purchase a new kitchen faucet, take a look at your present kitchen and consider how you use it. As you cook, clean, and live in your kitchen, consider why, and how often, you head for the sink. What do you like about your current faucet? And what faucet features are missing? With those thoughts in mind, follow our three steps to choose the perfect kitchen faucet for your home.
Luxury vs. Bargain: A Side-by-Side Look at the Pull-Down Kitchen Faucets
Lots of pull-down faucets have an attractive profile and some sort of warranty. Most are made mainly of brass with a stain-resistant finish and have a valve with ceramic discs, which is just what the plumber ordered. Now for the hard part. There are dozens of brands, with prices all over the map. So This Old House looked at a luxury pick and its bargain counterpart to identify the qualities to ask about when you consider all the options in between. Surprises included an extra-long spray hose on the bargain model for easy maneuvering around a supersized roasting pan, and the DIY-ready fittings on the high-end model. Check out their other features to help guide you through your next purchase.
Lever-handle pull-out kitchen faucet parts:
- Pull down kitchen mixer tap Spray Head: Heavy solid brass, with corrosion-resistant rubber spray nozzles; docks by clicking into place. Pause button stops water flow midstream. Or, All plastic with a painted chrome finish. Less durable than brass but lighter, making it easy to dock. No pause button, which limits usefulness of extra-long hose.
- Pull down kitchen tap Spray Hose: Leak-resistant braided-steel hoses come ready to connect to supply lines. Smooth braided-nylon hose extends 18 inches.
- Pull down kitchen faucet finishing: Brushed Nickel – three layers electroplated over brass. Warmer looking and more costly than chrome.
- Pull down kitchen faucet cartridge: Easy-grip ribbed lever with sure action. Valve cartridge is equipped with long-wearing ceramic discs.
- Single Handle and Mixing Valve: Standard chrome electroplated over brass. Lightweight chrome-over-zinc lever with easy action. Valve cartridge is equipped with ceramic discs.
- Kitchen Faucet Fittings: Brass fittings on copper tubes; steel hoses for water-supply connection are not included.
Buy the best faucet you can afford—you’re going to use it every day. Ceramic discs are key. And stick with a known brand so that you’ll be able to find replacement parts down the road.
How to Install A Pull-Down Kitchen Faucet? Pull-Down Spray Kitchen Sink Faucet Installation and Repair Tips from Professional plumbers. Seven easy steps to install or repair a Pull-out Spray Kitchen Faucet.
To add some functional elegance to a kitchen you may want to install a pull down kitchen faucet. This type of faucet is a single lever action faucet where you can pull the spout out of the faucet head for washing larger pots, cleaning vegetables or performing other cooking functions. A pull down kitchen faucet brings a contemporary style into your kitchen and modernizes your kitchen sink.
A pull out kitchen faucet can be elaborate or a basic pull out sprayer. It can come in combinations of two faucets (one on top of the other) or a single faucet that is designed to let you pull out the sprayer. Select the type that best fits your needs.
Before you purchase a pull down kitchen faucet, consider whether your current sink is designed for one. Most sinks have 3 or 4 holes in them for different types of faucets.
Make sure plug holes are available for unused openings. Single tub basin sinks are considered better choices that double sinks for this type faucet.
- Adjustable wrench
- Plumber’s tape
Step One – Remove Old Faucet
Before you remove the old faucet, turn off the hot and cold water supply and loosen the compression fittings with an adjustable wrench. Test the faucet to see if the water is off.
Drain off any excess water in pipes. If water is not shut off, you will need to shut of the main water supply. Catch excess water in a small bucket or bowl.
Step Two – Assemble the New Faucet
The faucet may need some assembly before you install it. Connect the supply lines to the sprayer head. Thread the assembly through the faucet hose on the sink. Use the set screw to attach the temperature control handle to the faucet. The set screw is located on the control handle.
Step Three – Seal Faucet
Once the faucet is assembled, place it onto the sink basin. Making sure everything fits, then apply plumber’s putty to the bottom of the faucet for a water tight seal. Make sure there are no gaps and that the entire surface is sealed.
Step Four – Attach Faucet to Sink
From under the sink, slide the housing unit up to the sink. This unit is usually a plastic, or metal, ring. Slide the large nut onto it, and tighten it with a basin wrench until it is snug.
Step Five – Connect Water Supply Lines
Using an adjustable wrench, connect the water supply lines to their respective valves. They are usually marked but, if not, then you will need to use some trial and error. Once they are connected, tighten compression fittings onto the valve until tight.
Step Six – Install Hose Weight
Most pull out kitchen faucets have a weight that will pull the faucet back in and limit the amount of hose that will extend. Decide where you want the weight on the hose and screw it onto the hose.
Step Seven – Test Water
Once the faucet is installed, run the water and test the flow. Flush out the aerator screen to see if the pressure is adequate. If not, then adjust the hoses and check for debris in the lines.